By Pete | My Husband’s Nook
That is one in all our favourite RV ideas and hacks for do it your self campers! Don’t know find out how to preserve RV awnings from flapping? Use my DIY RV awning tie down hack!
The greatest tenting gear isn’t essentially manufactured in a manufacturing facility, it might probably come out of your personal toolbox!
Psst we’re compensated…see our disclosures.
The Downside: Noisy RV Awning Flapping In Wind
We hate the noise made by a retractable RV awning when it’s flapping within the wind! After we purchased our newest RV, we have been on our first journey once we realized our previous RV awning tiedown strap was not lengthy sufficient for our new energy awning!
So, it’s a good factor we follow what we preach … one in all our RV tenting ideas for inexperienced persons is to carry instruments and spare components! I had to determine find out how to tie down an awning with the provides I had in my software field! Seems … this DIY hack works higher than our previous conventional awning strap package! I created this VIDEO to point out you find out how to tie down your RV patio awning with my DIY hack!
8 Steps: How To Tie Down Your RV Awning
Use these similar steps whether or not you could have a handbook awning or electrical one.
Step 1:
Hammer the Stake into the bottom instantly beneath the skin nook of your RV awning arms … similar to I did in my video.
Step 2:
Tighten the strain of the awning rafter arm.
I need “5 Secrets and techniques To Profitable Tenting Journeys” plus weekly tenting ideas & recipes.
Step 4:
Minimize the 1/8-Inch Nylon Rope to the suitable dimension (our awning required about 10 ft).
Then tie one finish of the rope to the carabiner clip.
Now take the opposite finish of the rope and run it via the 2 holes within the LARGE camring after which tie a knot on the finish.
1/8 Inch 100% Nylon Rope Strong Braid – Industrial Grade – Excessive UV and Abrasion Resistance
NOTE: For those who tie the knot ultimately of the rope earlier than you string it via the LARGE camring, you gained’t get it via the camring holes.
Observe the sequence as I describe it right here to keep away from frustration. *fistbump*
Step 6:
Run the knotted finish of the rope via the stake.
NOTE: The knot (you probably did this in step 4) ultimately holds the rope in place within the camring notch … similar to you see within the step 7 image.
Step 8:
With a slight quantity of strain, pull down on the carabiner clip to tighten bungee whereas adjusting the LARGE camring (up or down) to take away slack from the wire.
Repeat steps on the opposite finish of the awning.
BAM … You’re Finished!
Now that your RV awning tie down undertaking is full, you could have it protected from the wind when you are tenting within the rain or sunshine! You gained’t must take heed to that annoying noise that may drive a sane man loopy!
That’s find out how to preserve your RV awning from flapping within the wind AND keep away from marriage counseling on the similar time! Ha! Now chill and camp! P.S. This hack works on tent cover awnings too!
By no means Depart Unattended
It doesn’t matter what sort of system you employ, all of them have restrictions and might solely deal with hundreds as much as a sure variety of lbs. That’s why it is best to all the time take away your tie down and retract your awning so it’s securely locked in place if you end up away out of your rig.
Electrical Awnings & Wind Sensors
For those who’re RVing in a elaborate rig, you’ll have wind sensors in-built to your electrical awnings. When the wind exceeds the restrict, the awning robotically retracts … you don’t even must push a button! You probably have this setup, you don’t need something tying down the awning until it robotically releases to permit the awning to robotically retract at any given time.
VIDEO: Watch How You Do It
Print These Directions
How To Hold RV Awning From Flapping With DIY RV Awning Tie Down Hack
Tenting For Foodies RV and Tent Tenting Suggestions: How To Hold RV Awning From Flapping With DIY RV Awning Tie Down Hack
Yield: 1 Pair Of RV Awning Tie Downs
Price: $30
-
Hammer the Stake into the bottom instantly beneath the skin nook of your RV awning arms … similar to I did in my video.
-
Tighten the strain of the awning rafter arm.
-
Cling the Bungee over the nook of the awning construction (see photograph above).
-
Minimize the 1/8-Inch Nylon Rope to the suitable dimension (our awning required about 10 ft). Then tie one finish of the rope to the carabiner clip. Now take the opposite finish of the rope and run it via the 2 holes within the LARGE camring after which tie a knot on the finish. NOTE: For those who tie the knot ultimately of the rope earlier than you string it via the LARGE camring, you gained’t get it via the camring holes.
-
Cling the Carabiner Clip from the bungee hooks and simply let the rope grasp down towards the stake.
-
Run the knotted finish of the rope via the stake. NOTE: The knot (you probably did this in step 4) ultimately holds the rope in place within the camring notch.
-
Run the rope via the notch within the LARGE CamRing Tent Wire Tensioner.
-
With a slight quantity of strain, pull down on the carabiner clip to tighten bungee whereas adjusting the LARGE camring (up or down) to take away slack from the wire.
-
Repeat steps on the opposite finish of the awning.
-
All the time take away your tie down and retract your awning if you end up away out of your rig.
Please see video for additional directions.
Conventional RV Awning Tie Down Kits
The extra conventional strategies of find out how to tie down an awning are available a couple of types. Listed below are a couple of choices:
Camco Awning De-Flapper Max
The Camco Awning De-Flapper Max works by clipping 8″ extensive grippers to your awning then makes use of velcro-like hook and loop fastener straps mixed with sturdy nylon to connect the devices to the aspect awning arms to stop flapping in gentle windy and wet situations.
Camco Awning De-Flapper Max – Protects Your RV Awning From Expensive Rips and Tears, Rust Resistant
The factor that’s distinctive about this machine is that it doesn’t use any sort of awning stakes within the floor. It solely attaches the awning material to the assist arms. These are greatest for breezy situations once you need peaceable rest on the campsite with fundamental safety requiring minimal effort to put in. In case you are leaving the world, it is best to take away the grippers and retract your awning to be secure from surprising sudden winds.
Many RVers use this together with some type of ratchet straps or a wrinkle resistant, heavy responsibility pull strap with triangle rings to safe their construction to the bottom. Some of the in style and inexpensive selections is the JR Merchandise 25 Foot RV Awning Tie Down we’re discussing subsequent.
JR Merchandise 25 Foot RV Awning Tie Down
The JR Merchandise 25 Foot RV Awning Tie Down design is likely one of the mostly used ready-made devices to maintain an RV awning from flapping.
JR Merchandise 25 foot Awning Tie Down
The strap runs throughout the highest of your awning after which drops all the way down to the bottom the place it’s connected by stakes and the strain spring supplies the rigidity to the awning. As a result of the strap runs the size of the awning, this package doesn’t match each state of affairs … it solely matches awnings as much as 25 ft.
Camco Anchor Awning Strap Package
The Camco Anchor Awning Strap Package is much like our DIY hack design in that you’re anchoring each ends of your awning to the bottom. This awning anchor package makes use of spiral stakes that present further holding energy since you twist them into the bottom.
Camco Awning Anchor Package with Pull Pressure Strap
The sturdy strap snugs over the awning and two springs present the strain wanted to scale back the affect of awning flutter due to winds. A ground-anchored machine handles extra intense winds from mom nature versus units that may simply connect the material to the body.
How A lot Wind Can An RV Awning Stand up to?
It doesn’t matter what technique you employ to safe your awning, actually sturdy winds can exceed the potential of the gadget you might be utilizing to guard it.
How a lot is an excessive amount of if you end up coping with excessive winds? There is no such thing as a actual reply to this query … use widespread sense with regards to retracting your awning so that you don’t find yourself having to exchange it.
This RV homeowners discussion board has a very good dialogue about max wind speeds and find out how to preserve RV awning from flapping with out operating the danger of damaging the material, {hardware} and even your RV itself.
Your Instruments
If you plan your RV journeys, pay attention to distinctive traits of the situation the place you may be tenting and convey acceptable instruments.
I carry a lot of miscellaneous objects in my software field so I’m prepared for any shock I’ll encounter on our tenting journeys.
We created a extremely cool RV Device Package Guidelines you may obtain without cost so go seize a replica for your self. You’ll be able to thank me later!
